Virtual LAN

Creating and managing multiple VLANs on Haltdos appliance

This section shows how users can create and maintain multiple VLANs on Haltdos appliance / virtual instance. Apart from creating VLANs, users can also configure custom routing and route policies on traffic coming on VLANs.

Adding a VLAN

How to Use:

1. Go to Stack > Instances > Instance > Network > VLans

2. Configure your settings

3. Click Save

PARAMETERS	ACCEPTED VALUES	DEFAULT
Name	String	Empty
VLAN ID	Integer	Blank
Link	Drop-down	Empty
Addresses	IP String	Empty
Enable DHCP4	ENABLED / DISABLED	DISABLED
Enable DHCP6	ENABLED / DISABLED	DISABLED
Local Link	IPv4 / IPv6	Empty
Gateway 4	IP String	Empty
Gateway 6	IP String	Empty
Name Servers	IP String	Empty

Routes

PARAMETERS	ACCEPTED VALUES	DEFAULT
Route From	String	Empty
Route To	String	Empty
Route Via	String	Empty
Route Type	UNICAST / UNREACHABLE / PROHIBIT / BLACKHOLE	UNICAST
Route Scope	GLOBAL / LINK / HOST	GLOBAL
Metric	Integer	0

Route Policy

PARAMETERS	ACCEPTED VALUES	DEFAULT
Policy From	String	Empty
Policy To	String	Empty
Policy Table	Integer	1
Policy Priority	Integer	0
Policy Mark	Integer	1
Policy Service	String	Empty